home > News > Industry News

How to press and place the power adapter.Linear Power Adapter

source:Industry News     Popular:adapter     release time:2022-03-02 16:36:23     Article author:sznbone    

  How to press and place the power adapter.Linear Power Adapter(图1)

  In the process of producing power adapters, power adapter manufacturers need to go through the steps of pressing parts and laying plates. Today, power adapter manufacturers will share with you how to press parts and lay out plates for power adapters.

  Preparation before work:

  1. Wear the electrostatic ring and confirm that it is in good contact with the wrist and the electrostatic grounding wire;

  2. Read the homework instruction book, clarify the work content, steps and precautions;

  3. Prepare the furnace jig and cover plate and check that the furnace jig should be consistent with the specifications of the production model

  work procedure:

  1. Inspection of material taking: Take the PCBA completed by the station, and confirm that there is no missing, wrong or reversed insertion of components.

  2. Homework:

  ①Check the PCBA on the component surface of the plug-in line from top to bottom and from left to right The vertical PCB board is not skewed, and the defective parts are repaired to pass with fingers or tweezers;

  ③ Focus on T1 transformers, CN1 USB socket presses;

  ②Take the furnace jig to check that the jig is not broken, and the size and specification should be consistent with the production model (as shown in Figure 2); put the 4-connector PCBA output end of the checked OK into the furnace jig with the output end facing down. Put 4 large pieces of 6-connected PCBA on the fixture (as shown in Figure 3); and confirm that there are no defects such as dropped parts, floating height, skew, etc. during the PCBA fixture process. After OK, put the furnace jig lightly on the connecting table chain (as shown in Figure 4);

  ③Standardize the operation, repeat the above-mentioned step ②, and put the furnace jig into the connecting table chain in a correct and orderly manner;

  3. Visual inspection of the casting line: After confirming that the components are free of floating height and skew, put the PCBA lightly on the connecting table chain;

  In the production process, power adapter manufacturers will strictly control every link of production, do a good job in quality control, and improve the yield. Responsible for every customer.

  


Read recommendations:

MKS-1201250HEU Switching Power Supply

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

40W 4USB Charger,40W Charger,4USB Charger

Precautions for matching plug power cords for electrical and mechanical equipment of household elect

Classification, structure and characteristics of power adapters

Related Information

What are the conditions of use and maintenance methods for switching power supplies?

2022-05-21

Some Frequently Asked Questions about Power Adapters

2022-05-20

How to deal with the electromagnetic interference of switching power supply which is difficult in EM

2022-05-19

Six situations and solutions that cause the whistling of switching power supplies.power supply price

2022-05-18

Lightning Surge Test Method for Switching Power Adapters.adapter factory

2022-05-17

Two common power adapter output overload protection methods.ADAPTOR price

2022-05-16

Common fault maintenance skills of switching power supply

2022-05-14

How should we choose the charger?

2022-05-13

Power adapter expertise.CE ADAPTOR

2022-05-12

How to solve the high temperature rise of switching power supply transformer?

2022-05-11

The role of varistor in switching power supply

2022-05-10

Structural characteristics and working principle of varistor

2022-05-09

The role of varistor in switching power supply

2022-05-09

What are the main components of switching power supply

2022-05-07

Two ways for MOS devices to dissipate in high-power power supplies,CE ADAPTOR Processing

2022-05-06

Several common insulation protection technologies for power adapters

2022-05-05

What are the unique advantages of high frequency switching power adapter

2022-04-27

What are the main components of switching power supply.China cnc plastic cutting

2022-04-26

Troubleshooting method of switching power supply,CE ADAPTOR wholesale

2022-04-25

How to use the power adapter correctly

2022-04-23

What is the comparison between a charger and an adapter?

2022-04-23

The optimal solution of drone power management solution!

2022-04-22

Several common insulation protection technologies for power adapters

2022-04-21

What are the unique advantages of high frequency switching power adapter

2022-04-20

General Mechanism Analysis of Switching Power Adapter.ac power adapter wholesaler

2022-04-19

Suppression method of low frequency ripple of switching power supply

2022-04-16

Why is the power adapter making noise?

2022-04-15

When the power adapter is in normal use, what is the normal temperature?

2022-04-14

90% of people use the car charger incorrectly, are you using it right?CAR POWER SUPPLY sales

2022-04-13

The difference between a power adapter and a voltage regulator

2022-04-12

Popular recommended products

EI-48 ADAPTER LINEAR ADAPTOR Switching Power Adapter INTERCHANGEABLE ADAPTOR Linear Adapter

2020-08-28

MKS-120200BS-36 Switching Power Supply

2020-08-29

MKS-1203000EX Switching Power Supply

2020-08-29

MKS-1401700H Switching Power Supply

2020-08-29

60W 6USB Charger,60W Charger,6USB Charger,Charger

2020-08-27

24-65W Medical Switching Power Supply

2020-08-27

12-24W Medical Switching Power Supply

2020-08-27

36-90W Charger,36W Charger,90W Charger,40W Charger,50W Charger

2020-08-27

3-100W PCBA power supply 3-100W Customized power supply 3-100W power supply

2020-08-27

12W 2USB Charger,2USB Charger,12W Charger,USB Charger

2020-08-27

ER42 High Frequency Transformer

2020-08-27

EI-28 AC ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter Linear Adapter

2020-08-28

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

Inductance & Coil

2020-08-27

MKS-1201250HEU Switching Power Supply

2020-08-29

200-500W Switching Power Supply

2020-08-29

24-36W Charger,36W Charger,24W Charger,30W Charger

2020-08-27

500W Charger,Charger

2020-08-28

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

EI Power Transformer Power Transformer

2020-08-27

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

72-200W Switching Power Supply

2020-08-29

EI-57 ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter INTERCHANGEABLE ADAPTOR Li

2020-08-28

MKS-120200EU-36 Switching Power Supply

2020-08-29

12VDC8A 96W power supply

2020-08-28

24W USB Charger,24W Charger,USB Charger

2020-08-27

12-36W POE POWER SUPPLY

2020-08-27

EI-41 ADAPTER AC ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Adapter

2020-08-28

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

100-300W Charger,100W Charger,200W Charger,300W Charger

2020-08-27
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved