home > News > Industry News

Fire retardant measures for cables

source:Industry News     Popular:adapter     release time:2021-06-21 10:10:20     Article author:sznbone    

  Fire retardant measures for cables

  (a) Apply fire-resistant paint on the surface of the cable.

  (b) Wrap the parts of the cable that need to be flameproof with fireproof tape.

  (c) The holes where the cable passes through the wall, the bottom of the plate, and the shaft are tightly sealed with refractory materials to avoid the spread and spread of high-temperature smoke when the cable is on fire, which will cause the fire area to expand.

  (d) Set up heat-resistant and fire-proof panels between the cable layers, segmented partition walls and fire doors to prevent the cable layers from combusting and expand the fire.

Fire retardant measures for cables(图1)

  (e) Wrap the cable with a heat-insulating and flame-resistant material. When the cable is on fire, the wrapped cable is isolated from the fire by the heat-insulating and flame-resistant material to avoid burning. If the cable itself catches fire, the lack of oxygen in the bandage can cause the fire to extinguish itself, preventing the fire from spreading to the outside of the bandage.

  The common faults of power cables are oil leakage, grounding and short circuit, internal disconnection, etc. For these failures, effective measures should be taken to make the defects be dealt with in a timely manner or at least not continue to deteriorate. Oil leakage caused by overload. When the cable is overloaded and the temperature is too high, the oil pressure inside the cable rises a lot. Generally, if the cable has no intermediate joint or the cable is of good quality, the cable oil will leak out from the cable end by breaking the seal. Due to this situation, the oil leakage caused should first be monitored for overload operation during the operation of the cable. Under normal circumstances, the overload operation of the cable is strictly prohibited.

  The main reason-pimple

  1. The phenomenon of pimple

  (1) The lump produced by the resin during the plasticization process has small crystal points and small particles on the surface of the plastic layer, which are distributed around the surface of the plastic layer.

  (2) The lump produced by scorching, there is scorch on the surface of the plastic layer, especially reflected on the surface of the glue joint.

  (3) Impurity lumps, there are impurities on the plastic surface, and there are impurities in the sliced lumps.

  (4) Plastic bumps caused by poor plasticization. After slicing, it is found that there is cooked glue inside the bumps.

  2. Causes of pimple

  (1) Due to the low temperature control, the plastic is extruded from the die before it is plasticized.

  (2) The quality of plastics is poor, and there are resins that are difficult to plasticize, which are squeezed out without being completely plasticized.

  (3) Some impurities are added into the hopper when feeding, causing impurity lumps.

  (4) The temperature control is super high, causing scorch and scorching lump.

  (5) The molded cover is not pressed tightly, and it deteriorates after being glued, and scorched bumps appear.


Read recommendations:

200-500W Switching Power Supply

10-24W Charger,24W Charger,10W Charger

24-65W Medical Switching Power Supply

What is the difference between a power adapter and a conversion socket? How to authenticate?

CE certification power adapter introduction

Related Information

What are the conditions of use and maintenance methods for switching power supplies?

2022-05-21

Some Frequently Asked Questions about Power Adapters

2022-05-20

How to deal with the electromagnetic interference of switching power supply which is difficult in EM

2022-05-19

Six situations and solutions that cause the whistling of switching power supplies.power supply price

2022-05-18

Lightning Surge Test Method for Switching Power Adapters.adapter factory

2022-05-17

Two common power adapter output overload protection methods.ADAPTOR price

2022-05-16

Common fault maintenance skills of switching power supply

2022-05-14

How should we choose the charger?

2022-05-13

Power adapter expertise.CE ADAPTOR

2022-05-12

How to solve the high temperature rise of switching power supply transformer?

2022-05-11

The role of varistor in switching power supply

2022-05-10

Structural characteristics and working principle of varistor

2022-05-09

The role of varistor in switching power supply

2022-05-09

What are the main components of switching power supply

2022-05-07

Two ways for MOS devices to dissipate in high-power power supplies,CE ADAPTOR Processing

2022-05-06

Several common insulation protection technologies for power adapters

2022-05-05

What are the unique advantages of high frequency switching power adapter

2022-04-27

What are the main components of switching power supply.China cnc plastic cutting

2022-04-26

Troubleshooting method of switching power supply,CE ADAPTOR wholesale

2022-04-25

How to use the power adapter correctly

2022-04-23

What is the comparison between a charger and an adapter?

2022-04-23

The optimal solution of drone power management solution!

2022-04-22

Several common insulation protection technologies for power adapters

2022-04-21

What are the unique advantages of high frequency switching power adapter

2022-04-20

General Mechanism Analysis of Switching Power Adapter.ac power adapter wholesaler

2022-04-19

Suppression method of low frequency ripple of switching power supply

2022-04-16

Why is the power adapter making noise?

2022-04-15

When the power adapter is in normal use, what is the normal temperature?

2022-04-14

90% of people use the car charger incorrectly, are you using it right?CAR POWER SUPPLY sales

2022-04-13

The difference between a power adapter and a voltage regulator

2022-04-12

Popular recommended products

30-500W LED Power Supply 30-500W Power Supply

2020-08-27

200-500W Switching Power Supply

2020-08-29

60W 6USB Charger,60W Charger,6USB Charger,Charger

2020-08-27

24-65W Medical Switching Power Supply

2020-08-27

EI-35 ADAPTER AC ADAPTER SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

40W 4USB Charger,40W Charger,4USB Charger

2020-08-27

10-24W Charger,24W Charger,10W Charger

2020-08-27

EI-57 ADAPTER LINEAR ADAPTOR Linear Power Adapter Switching Power Adapter INTERCHANGEABLE ADAPTOR Li

2020-08-28

12W CAR CHARGER,12W USB CAR CHARGER,CAR CHARGER,12W CHARGER

2020-08-27

MKS-1202000-36 Switching Power Supply

2020-08-29

24W USB Charger,24W Charger,USB Charger

2020-08-27

12W 2USB Charger,2USB Charger,12W Charger,USB Charger

2020-08-27

MKS-1201250HEU Switching Power Supply

2020-08-29

Transformer,Power Transformer,Ring Power Transformer

2020-08-27

36-90W Charger,36W Charger,90W Charger,40W Charger,50W Charger

2020-08-27

MK-C1806028 MKA ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

MKS-120200BS-36 Switching Power Supply

2020-08-29

EI Power Transformer Power Transformer

2020-08-27

EI-66 ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Power Adapter Linear Adapter

2020-08-28

12W POWER SUPPLY,12W CAR POWER SUPPLY,POWER SUPPLY,CAR POWER SUPPLY

2020-08-27

MKS-1203000EX Switching Power Supply

2020-08-29

MKS-1401700H Switching Power Supply

2020-08-29

45W PD Charger,45W Charger,PD Charger

2020-08-27

3-15W Switching Power Supply

2020-08-28

24V1.5A 36W Switching Power Supply

2020-08-29

12-24W Medical Switching Power Supply

2020-08-27

19V2A 36W Switching Power Supply

2020-08-28

500W Charger,Charger

2020-08-28

72-200W Switching Power Supply

2020-08-29

EI-41 ADAPTER AC ADAPTER LINEAR ADAPTOR SWITCHING ADAPTOR Linear Adapter

2020-08-28
Copyright 2020 © Merryking Technology Co., Ltd. All rights reserved